-
Thermal Abuse Test Chamber
The thermal abuse test chamber is used to perform thermal abuse tests on lithium batteries in accordance with the requirements of GB/T36276 or GB/T36972, UL1973 and other test standards.The equipment uses 5mm thick SUS304 stainless steel + external welded reinforcement to ensure the strength of the inner box to prevent the impact of battery explosion from damaging the box.The temperature of the inner box is accurately controlled by an excellent algorithm, and the equipment performance fully meets the test requirements.The excellent design reduces the energy consumption of the equipment and becomes an energy-saving and environmentally friendly thermal abuse test chamber.The equipment is designed with an explosion-proof pressure relief port, and a pressure relief door is installed externally. When the pressure in the box is too high, the pressure relief door is opened.The equipment door, pressure relief door and box are connected with high-strength hinges and stainless steel explosion-proof chains to ensure the reliability of the equipment.Send Email Details -
Battery Extrusion Puncture Tester
RJD-JZ-2T-300L
Send Email Details
The battery extrusion puncture tester is mainly used to simulate the safety and reliability testing of batteries after being extruded, deformed or punctured under different conditions. Through the laboratory extrusion puncture test, the battery is simulated to be deformed or punctured by a steel needle due to external force collision, and the test data is obtained at the same time, providing experimental data and basis for optimizing product design, as well as safety risk assessment and verification.
The equipment consists of a servo system, an extrusion part, a puncture part, a control system, a safety protection system, a data acquisition system, etc. -
Battery Short Circuit Tester
RJD-DL-1000A
Send Email Details
The battery short circuit tester is designed based on various battery short circuit test standard requirements, and is required to meet the battery performance standard specifications. According to the standard requirements, the short circuit device must comply with different internal resistance tests to obtain the maximum short circuit current required by the test.
The tester is composed of a sheet metal chassis, a high current switch, a resistor part, a control system, a safety protection system, a data acquisition system, etc. -
High And Low Temperature Test Chamber
RJD-UAT-150L
Send Email Details
The test chamber is suitable for high-temperature and low-temperature reliability tests of industrial products. The performance indicators of parts and materials of lithium-ion batteries, electronic and electrical, automobiles and motorcycles, aerospace, ship weapons, colleges and universities, scientific research institutions and other related products are tested under high-temperature and low-temperature (alternating) cycle changes.
The high and low temperature test chamber is mainly composed of a box, a refrigeration system, a heating system, an air circulation and a control system.
