Needle Puncture Tester

The battery puncture extrusion tester is mainly used to simulate the safety and reliability testing of batteries after being punctured or extruded under different conditions.
Pressure, displacement, voltage drop, and temperature can be used as control variables alone or in combination. The test will be stopped when any condition reaches the set value.
It has pressure, displacement, speed, type variable, temperature, and voltage data recording and real-time display of data curves.
It can set multi-step extrusion or multi-step puncture functions.
The test chamber is composed of flame-retardant components such as high temperature resistance and corrosion resistance; the reinforced design can effectively isolate the damage caused by fire and explosion during the test.
Patent number: ZL201920401188.9

Short Circuit Test Machine

The battery short-circuit tester is designed based on the requirements of various battery short-circuit test standards. It is required to meet the battery performance standard specifications. According to the standard requirements, the short-circuit device must comply with different internal resistance tests to obtain the maximum short-circuit current required by the test.
The new high-current switch (certified by a third party) is adopted to eliminate the bulky vacuum box; the high-current short-circuit switch has the advantages of low power, energy saving and environmental protection, arc extinguishing and rust prevention.
High-stability alloy is used as the resistance material to achieve temperature drift <5%F.S to ensure the credibility of the test.
The equipment has three relatively independent control modes: remote PC + on-site touch screen + remote control.
The equipment software has short-circuit current, voltage, temperature data records and draws real-time curves, and the test data can be exported.
The equipment can complete the setting of test parameters, collection of test data, video recording, etc. on a computer software >30 meters away.
Patent number: ZL202120619268.9

Drop Test Machine (Free Fall)

The equipment mainly distinguishes the damage of the battery caused by falling, and evaluates the impact resistance during transportation and handling. The free fall test can be performed on the surface, corners and edges of the battery.
The equipment adopts a single-column structure, with electric reset, electric control drop and electric lifting devices, which is easy to use; the drop height is accurate, the display is intuitive, the drop arm rises and falls smoothly, and the drop angle error is small.
The equipment can set parameters on the touch screen or remote PC.
The equipment can be installed with a protective fence to ensure the personal safety of the test personnel.

Low Pressure Test Chamber

Low pressure test chamber is mainly used in the fields of battery, aviation, aerospace, information, electronics, etc. It is suitable for environmental adaptability and reliability testing of batteries, instruments, electrical products, materials, components, etc. under low pressure.

Thermal Abuse Test Chamber

Battery Extrusion Puncture Tester

RJD-JZ-2T-300L
The battery extrusion puncture tester is mainly used to simulate the safety and reliability testing of batteries after being extruded, deformed or punctured under different conditions. Through the laboratory extrusion puncture test, the battery is simulated to be deformed or punctured by a steel needle due to external force collision, and the test data is obtained at the same time, providing experimental data and basis for optimizing product design, as well as safety risk assessment and verification.
The equipment consists of a servo system, an extrusion part, a puncture part, a control system, a safety protection system, a data acquisition system, etc.