2-Zone Thermal Shock Test Chamber

Thermal shock chambers are used to test composite materials and material structures to see how well they can withstand continuous exposure to high and extremely low temperatures. This means testing chemical changes or physical damage caused by thermal expansion and contraction in a short period of time. Applicable objects include metals, plastics, rubber, electronics and other materials.

Consult

Features
Technical Indicators
Overall Dimension


Features: ◆Adopt color touch screen control, friendly interface, and parameter recording function; ◆Ultra-low defrosting times, greatly improving test efficiency; ◆Basket conversion time is less than 10 seconds, and temperature recovery time is less than 5 minutes; ◆R232, R485 output interface, realize multiple remote monitoring and control; ◆Error information is displayed in real time, easy to troubleshoot. Model RJD-TS-75DB RJD-TS-108DB RJD-TS-256DB Inner box size（mm） W500*D500*H300 W600*D600*H300 W800*D800*H400 Dimensions（mm） W1500*D2150*H2200 W1650*D2250*H2220 W1950*D2600*H2200 Shock temperature Low temperature shock range -10℃～-40℃ -10℃～-55℃ -10℃～-40℃ -10℃～-55℃ -10℃～-40℃ -10℃～-55℃ High temperature shock range 60℃～150℃ Preheating zone heating rate 5℃/min Precooling zone cooling rate 2℃/min Precooling zone temperature range -10℃～-60℃ -10℃～-70℃ -10℃～-60℃ -10℃～-70℃ -10℃～-60℃ -10℃～-70℃ Preheating temperature range 60℃～200℃ Dwell time 30min Recovery time 5min to restore to within ±2℃ Temperature fluctuation ≤1℃ Basket changeover time ≤10s Structural parameters Inner box material SUS304 stainless steel Outer box material Galvanized sheet powder high temperature spray Insulation material Environmentally friendly hard polyurethane insulation material, thickness 100mm Refrigeration system Including: compressor, condenser, oil separator, filter dryer, solenoid valve, expansion valve and other refrigeration components Water-cooled, air-cooled, single-stage fully sealed compressor unit, cascade semi-sealed compressor unit Controller Touch-type PLC architecture controller with multiple groups of intelligent PID control Structural advantages Adopting a vertical, hot and cold two-box structure, using a basket to quickly transfer the test sample to the test area, the purpose of hot and cold shock test is achieved. This shock method minimizes the heat load during hot and cold shock and shortens the temperature recovery time. Protective devices Compressor overload; compressor oil shortage; compressor overpressure; heater leakage protection; heater short circuit and overload protection; heating system overtemperature protection; test space ultra-high temperature/ultra-low temperature protection (digital display); fan motor overheating; main power phase sequence and phase loss protection; overload and short circuit protection; three-color light alarm device; emergency stop control; basket position alarm; test chamber shell grounding protection. Communication Protocol Open communication protocol can be used with other devices Supply voltage AC380V±10% 50HZ±10%

Features:	◆Adopt color touch screen control, friendly interface, and parameter recording function; ◆Ultra-low defrosting times, greatly improving test efficiency; ◆Basket conversion time is less than 10 seconds, and temperature recovery time is less than 5 minutes; ◆R232, R485 output interface, realize multiple remote monitoring and control; ◆Error information is displayed in real time, easy to troubleshoot.
Model		RJD-TS-75DB		RJD-TS-108DB		RJD-TS-256DB
Inner box size（mm）		W500D500H300		W600D600H300		W800D800H400
Dimensions（mm）		W1500D2150H2200		W1650D2250H2220		W1950D2600H2200
Shock temperature	Low temperature shock range	-10℃～-40℃	-10℃～-55℃	-10℃～-40℃	-10℃～-55℃	-10℃～-40℃	-10℃～-55℃
	High temperature shock range	60℃～150℃
Preheating zone heating rate		5℃/min
Precooling zone cooling rate		2℃/min
Precooling zone temperature range		-10℃～-60℃	-10℃～-70℃	-10℃～-60℃	-10℃～-70℃	-10℃～-60℃	-10℃～-70℃
Preheating temperature range		60℃～200℃
Dwell time		30min
Recovery time		5min to restore to within ±2℃
Temperature fluctuation		≤1℃
Basket changeover time		≤10s
Structural parameters	Inner box material	SUS304 stainless steel
	Outer box material	Galvanized sheet powder high temperature spray
	Insulation material	Environmentally friendly hard polyurethane insulation material, thickness 100mm
	Refrigeration system	Including: compressor, condenser, oil separator, filter dryer, solenoid valve, expansion valve and other refrigeration components Water-cooled, air-cooled, single-stage fully sealed compressor unit, cascade semi-sealed compressor unit
	Controller	Touch-type PLC architecture controller with multiple groups of intelligent PID control
	Structural advantages	Adopting a vertical, hot and cold two-box structure, using a basket to quickly transfer the test sample to the test area, the purpose of hot and cold shock test is achieved. This shock method minimizes the heat load during hot and cold shock and shortens the temperature recovery time.
	Protective devices	Compressor overload; compressor oil shortage; compressor overpressure; heater leakage protection; heater short circuit and overload protection; heating system overtemperature protection; test space ultra-high temperature/ultra-low temperature protection (digital display); fan motor overheating; main power phase sequence and phase loss protection; overload and short circuit protection; three-color light alarm device; emergency stop control; basket position alarm; test chamber shell grounding protection.
Communication Protocol	Open communication protocol can be used with other devices
Supply voltage	AC380V±10% 50HZ±10%