model | RJD-HTN-225D | RJD-HTN-408D | RJD-HTN-800D |
Single layer inner box size（mm） | W600*D500*H750 | W800*D600*H850 | W1000*D1000*H800 |
Outer box size（mm） | W1300*D950*H1650 | W1500*D1050*H1950 | W1740*D2300*H1900 |
Structural method | The test chamber is designed as an integral structure with two upper and lower working chambers. | ||
Temperature range | Room temperature +10℃～+150℃ (customizable) | ||
Temperature fluctuation | ±0.3℃ | ||
Heating rate | Average 1～5℃/minute (linear no-load) (customizable) | ||
Temperature uniformity | ≤±2℃ (no load, constant state) | ||
Observation window | W300XH300MM, explosion-proof glass with explosion-proof film | ||
Control method | Touch screen programmable PLC, with USB interface, RS485 interface can be connected to computer control, dedicated network control software, convenient remote monitoring, data collection | ||
Inner box material | SUS304# mirror stainless steel, 1.0MM thick, sprayed with Teflon insulation | ||
Outer box material | Galvanized sheet powder high temperature spray | ||
Supply voltage | AC380V±10% 50HZ±10% | ||
Safety protection | Automatic explosion-proof pressure relief device, explosion-proof chain, three-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc. | ||
Lead hole | One for each of the 100mm in the middle, with soft silicone plug and stainless steel cover | ||
Expanded functionality | Open communication protocol for use with charging and discharging machines | ||
Supply voltage | AC380V±10% 50HZ±10% | ||
Reference Standards | GB/T 2423.2—2008 Basic environmental test procedures for electrical and electronic products Test B: High temperature test GJB 150.3A-2009 Laboratory environmental test methods for military equipment Part 3: High temperature test GB/T 11158-2008 Technical conditions for high temperature test chambers GB/T 31485-2015 Safety requirements and test methods for power batteries for electric vehicles; QC/T 743-2006 Lithium-ion batteries for electric vehicles; QC/T 742-2006 Lead-acid batteries for electric vehicles; GB/T 5170.1-2008 Basic parameter verification methods General principles GB/T 5170.2-2008 Inspection methods for environmental test equipment for electrical and electronic products Temperature test equipment | ||